Posts
398
Following
437
Followers
342
Linux Kernel security developer, working for Microsoft. Also W7TXT. Views are my own.
Topics: #Linux #kernel #security, #amateurradio, #RF, #hamradio, #electronics, #science, #radioastronomy, #physics, #space, #arduino.

📡 https://w7txt.net/
🐧 https://blog.namei.org/
☠️ https://www.facebook.com/w7txt
jmorris

James Morris

It ain’t much, but it’s honest work. Az/El sensors serial (SSI) to Arduino board. Removed an RS485 layer.
@adafruit 1/4 size proto boards are cute.
1
0
1
jmorris

James Morris

Reply to @jmorris
From the same era, when writing a GUI app in Linux probably meant buying a shelf full of X programming books. I was really, really, into satellites.
1
0
2
jmorris

James Morris

Edited 11 months ago
Just tripped across this blast from the past: my first published article, in an .au electronics magazine.

Remember paper magazines? No? Ok.



#hamradio #amateurradio #satellite #electronics
1
0
6
jmorris

James Morris

Performed some more mm-wave testing at the PNW Microwave build day, looking at the output of the 40-50 GHz quadrupler. Thanks to W7GLF for bringing in his spectrum analyzer & external mixer. Results forthcoming.


#amateurradio #hamradio #microwave #mmwave #electronics
0
0
5
jmorris

James Morris

Testing a Ka band LNB, specified for 20.2-21.2 GHz. I could not see any signals beyond 22.8 GHz (well short of the 24 GHz amateur band), but that could be due to issues at the IF level. Worth investigating further. I was able to see a good signals at 22.2, an important radio astronomy frequency. #amateurradio #microwave #radioastronomy
1
0
1
jmorris

James Morris

Edited 1 year ago
Just received this in gmail. Seems like my ad blocker and/or ublock origin is working well here to stop them tracking my behavior. I have in fact been opening their emails. UbO for the email shows dozens of blocked requests to play.google.com and other related sites.
1
0
1
jmorris

James Morris

Current non-fiction reading pile.
3
0
4
jmorris

James Morris

It’s not everyday you get to touch an SR-71. It didn’t quite feel like metal, the paint seems to dampen it?
0
0
5
jmorris

James Morris

Edited 1 year ago
Got distracted working on slides, used the AI in powerpoint to make some alien cities. Here's one on an accretion-disk world. The "water" is not for swimming.
0
0
1
jmorris

James Morris

At Linux Plumbers, toolchain track. @linuxplumbersconf
0
0
2
jmorris

James Morris

Reply to @jmorris
I now have a LOVELY combination of C and C++ to clean up one day.
0
0
3
jmorris

James Morris

Working on some long-needed updates to my 1.2m dish setup. Mounting an azimuth sensor (ETS25 absolute encoder) directly under the Az slew drive. A previous belt-driven version was too complicated. This is all upside down, btw. #amateurradio #hamradio #radioastronomy #electronics #microwave
0
0
3
jmorris

James Morris

Made some millimeter waves today, presumably at 47.088 GHz. Using a Kuhne synth at 11.772 GHz into a WA1MBA quadrupler. I’m able to detect power in this band (6mm), but not frequency (yet). #microwave #mmwave #hamradio #amateurradio.
0
0
6
jmorris

James Morris

Reply to @selzero@syzito.xyz
@selzero
0
0
3
jmorris

James Morris

Reply to @mcdanlj@social.makerforums.info
@mcdanlj I’ve tried a YG-1 spiral flute tap here now and it is working well. It seems to need much lower torque than regular or form taps. I think the form tap is more precise and will provide more strength, but this is not critical in my application.
0
0
1
jmorris

James Morris

Pro tip ?
1
1
7
jmorris

James Morris

Saw a lot of Aurora flying over Greenland on the way to Linux Security Summit EU. This is the best I could do with an older iPhone #linux #linuxsecuritysummit #space #spaceweather #hamradio #amateurradio
0
1
8
jmorris

James Morris

Reply to @mcdanlj@social.makerforums.info
@mcdanlj a mill would be great but I currently have no room for one. Btw, I ended up brute force drilling the broken taps out with a solid tungsten carbide bit (which broke twice), then I was able to drill & tap for 6-32. There was enough slack in the copper spreader to handle some misalignment. The rest of the 4-40 were done very carefully with a form tap and tap magic. I’ll try the spiral flute next.
1
0
2
jmorris

James Morris

The “2nd level of hell” starter kit for metalworking.
0
0
3
jmorris

James Morris

After many hours, including re-capping the power supply (no dice, but worthwhile in any case), and tracing through most of the upper section, I finally found the issue with this Tektronix spectrum analyzer. A tantalum cap on the horizontal storage board failed and shorted the +15v bus. Replaced it and the SA seems to be working ok so far. #hamradio #amateurradio #electronics
1
0
12
Show older
About social.kernel.org

Terms of service

  1. Please do not use this service in violation of the Linux Kernel Code of Conduct. Doing so will result in your account suspension with the referral of the matter to the CoC committee.

  2. "Repeating"/"boosting" someone else's status on this platform will be treated as endorsement and will fall under rule #1.

  3. You are encouraged to use this platform to promote your work on the Linux Kernel, but there is no restriction on permitted topics (with the exception of anything covered by #1 above).

  4. There is no requirement to post in English, but it should be considered the primary language of communication on this platform.

Privacy notice

The admins of this service have access to all posted statuses. They aren't looking, but if it's something they shouldn't know about, then you should not post it on this platform.

Please see the Linux Foundation Privacy Policy, which applies to this platform as well.

Getting your own account

If you would like an account on this instance, please check that the following applies to you:

  • You are listed in MAINTAINERS or CREDITS

  • OR: You have a kernel.org account or email address

  • OR: You have a long and established history of involvement with the Linux Kernel

If the above is true and you agree with the Terms of Service and Privacy Notice listed above, please use these instructions to request an account: