Posts
4417Following
315Followers
471OpenPGP: 3AB05486C7752FE1
Jarkko Sakkinen
jarkko
The priority for me was to squeeze down the compilation time for testing/CI while still having up to date tracing capabilities.
0
1
1
Jarkko Sakkinen
jarkkoDynamic EQ is not a great tool for shaping transients as the filters are connected in series. This will result most "bending" transients as EQ points will interact and are interconnected. For shaping, band needs to be split into blocks, and this exactly what a multi-band compressor does.
This reduces the meaningful parameters to exactly one: dynamic range:
1. Define a dynamic range (in dB for an EQ point.
2. Figure out values for the parameters that keep it within that range.
So with the dynamic EQ below this would mean a manual tuning until you find some
values that seem to work, and depending on signal coming this could even mean automating those parameters, depending on how static the signal is. Also any change to the signal coming in would require re-adjusting them.
On the other hand, Pro-Q3 starts from the dynamic range as the input parameter, listens the signal and adjusts compressor parameters dynamically to stay within the range, without user intervention.
Not my cup of tea because the choice is between spending hours on it vs spending less than a minute figuring this all out 🤷
#MusicProduction
0
0
0
repeated
Alasdair Allan
aallan@mastodon.socialAnnounced today at @defcon is #RaspberryPi's new microcontroller, the #RP2350. Two #Arm Cortex-M33 cores, two #RISCV Hazard3 cores, and more of everything you liked about #RP2040. Congratulations to all my former colleagues at Pi on a lot of hard work! https://www.raspberrypi.com/news/raspberry-pi-pico-2-our-new-5-microcontroller-board-on-sale-now/
0
2
0
So the packages that I actually install from distributions repositories are pretty basic and boring: git, vim (the regular one), gcc, msmtp and that kind of old and dusty stuff, which exists everywhere.
And I use my desktop exactly for doing work and not much else.
0
0
1
In a leisure time I use Mac with the logic that changing operating systems gives me as a remote worker feeling of moving between workplace and home. And it is better place for watching crap and trying out new and flashy stuff because it is broken to begin with anyhow ;-)
0
0
1
Jarkko Sakkinen
jarkko
0
0
2
Jarkko Sakkinen
jarkkoHowever, having some to say that please run command instead of just reading password should not be tedious to maintain. Gives user a choice.
Problem implementing custom encryption storages is difficult and one can easily introduce a completely new set of security issues by doing that.
So I go through the official route but what I was thinking would be to add "-passcmd" to /connect.
1
0
1
repeated
George Takei 
🏳️🌈🖖🏽
georgetakei@universeodon.com
My heartfelt condolences to the family and friends of actress Patti Yasutake. Fans will forever cherish her portrayal of Nurse Alyssa Ogawa on “Star Trek: The Next Generation.” Personally, I’ll remember her as a dear friend, whose sister was the late Irene Hirano Inouye, a founder of the Japanese American National Museum.
https://variety.com/2024/legit/news/patti-yasutake-dead-beef-star-trek-1236097412/
1
1
0
Jarkko Sakkinen
jarkko
0
0
0
Jarkko Sakkinen
jarkkoThe spec does not have any even pseudo code for opcodes, let alone upstream with official VHDL/Verilog.
How come RISC-V be open hardware when there is no hardware *at all*? It's like I would explain some imaginary specs for imaginary CPU in this comment would claim that here's a new open CPU ecosystem, fast-forward to the future and beyond ;-)
One can at most say from current specs that there is a collection of abstract ideas of register layout, opcodes (some of which are *ambiguous*) etc. AND a marketing brand for corporations involved :-) I still like to work on this stuff because when the shit is still broken, that is *exactly* the fun zone :-)
1
0
1
Have to add that I neither like the silly sec.conf in #weechat ;-) It sucks but is less worse than exposing passwords in plain text. I use weechat at least up until this has been fixed (if it ever will be). [the best possible solution would be obviously to have password command option like every other software]
I neither have motivation to add that option myself because it is quite obvious that it would be pain to get it landed based on comment that I responded to. I would only end up spending 1-2 nights writing code and 2 months collecting bad karma ;-)
1
0
0