Jarkko Sakkinen
Posts
3711Following
217Followers
381OpenPGP: 3AB05486C7752FE1
Jarkko Sakkinen
jarkko
Edited 5 months ago
People say me that #Kirchoff #EQ is great or even better than #FabFilter Pro-Q3 but...
Dynamic EQ is not a great tool for shaping transients as the filters are connected in series. This will result most "bending" transients as EQ points will interact and are interconnected. For shaping, band needs to be split into blocks, and this exactly what a multi-band compressor does.
This reduces the meaningful parameters to exactly one: dynamic range:
1. Define a dynamic range (in dB for an EQ point.
2. Figure out values for the parameters that keep it within that range.
So with the dynamic EQ below this would mean a manual tuning until you find some
values that seem to work, and depending on signal coming this could even mean automating those parameters, depending on how static the signal is. Also any change to the signal coming in would require re-adjusting them.
On the other hand, Pro-Q3 starts from the dynamic range as the input parameter, listens the signal and adjusts compressor parameters dynamically to stay within the range, without user intervention.
Not my cup of tea because the choice is between spending hours on it vs spending less than a minute figuring this all out 🤷
#MusicProduction
Dynamic EQ is not a great tool for shaping transients as the filters are connected in series. This will result most "bending" transients as EQ points will interact and are interconnected. For shaping, band needs to be split into blocks, and this exactly what a multi-band compressor does.
This reduces the meaningful parameters to exactly one: dynamic range:
1. Define a dynamic range (in dB for an EQ point.
2. Figure out values for the parameters that keep it within that range.
So with the dynamic EQ below this would mean a manual tuning until you find some
values that seem to work, and depending on signal coming this could even mean automating those parameters, depending on how static the signal is. Also any change to the signal coming in would require re-adjusting them.
On the other hand, Pro-Q3 starts from the dynamic range as the input parameter, listens the signal and adjusts compressor parameters dynamically to stay within the range, without user intervention.
Not my cup of tea because the choice is between spending hours on it vs spending less than a minute figuring this all out 🤷
#MusicProduction
0
0
1
Jarkko Sakkinen
jarkko
Took me two years to pay attention this setting for filters in the Poly and FX Grid devices of #Bitwig.
I've been wondering why they just don't feel or sound right but could not have pointed my finger. So I just put this it to +12 dB. and problem fixed.
With stock devices (not necessarily with some analog emulated plugins) sound does not destroy. If you add let's 20 dB gain boost and bring it down the same amount it should be perfectly recovered (assuming that signal path is "stock-only").
#MusicProduction
I've been wondering why they just don't feel or sound right but could not have pointed my finger. So I just put this it to +12 dB. and problem fixed.
With stock devices (not necessarily with some analog emulated plugins) sound does not destroy. If you add let's 20 dB gain boost and bring it down the same amount it should be perfectly recovered (assuming that signal path is "stock-only").
#MusicProduction
1
0
1
Jarkko Sakkinen
jarkko
0
0
1
Jarkko Sakkinen
jarkko
@gromit @adamw
Sorry I was too busy having a weekend but here's a screen cast that proves that -fno-lto addresses the issue :-)
I definitely going to check also later on https://gitlab.archlinux.org/archlinux/packaging/packages/isync/-/issues/1 but at sight I don't really believe this is the same issue, it fails elsewhere. Obviously this can be considered most as guess because I don't know how the internals of mbsync interact with each other.
Sorry I was too busy having a weekend but here's a screen cast that proves that -fno-lto addresses the issue :-)
I definitely going to check also later on https://gitlab.archlinux.org/archlinux/packaging/packages/isync/-/issues/1 but at sight I don't really believe this is the same issue, it fails elsewhere. Obviously this can be considered most as guess because I don't know how the internals of mbsync interact with each other.
1
0
0
Almost feel ashamed writing such a dumb tool but the truth is that #musicians love bad software (and companies that hate musicians).
Best alternative I know for this would be this ugly Win32 vomit:
Best alternative I know for this would be this ugly Win32 vomit:
1
0
0
Jarkko Sakkinen
jarkko
Edited 5 months ago
was worth of trouble making this quick little tool for getting millisecond lengths for different divisions.
i think i also add note frequency chart type of thing to it but that is less crucial. Does all calculations with rational numbers instead of floating point numbers as there are no imaginary numbers in this context.
#audio #midi #delay #MusicProduction
i think i also add note frequency chart type of thing to it but that is less crucial. Does all calculations with rational numbers instead of floating point numbers as there are no imaginary numbers in this context.
#audio #midi #delay #MusicProduction
1
0
0